SmartLITE
VEGA 8×8 Ka
A compact, low-SWaP Ka-band terminal for space- and power-constrained platforms.
SmartLITE · VEGA 8×8 Ka
Technical specifications
Terminal specifications from the VEGA 8×8 Ka data sheet.
RF and data
- Frequency range
- TX: 27.5-30 GHz; RX: 17.7-20.2 GHz
- Typical GEO data rate
- 7-100 kbps; depends on satellite resources
- Duplexing mode
- TDD
- EIRP
- 19 dBW @ 0° scan; 17 dBW @ 60° scan (typical)
- G/T
- -6.2 dB/K @ 0° scan; -9 dB/K @ 60° scan (typical)
- Tx & Rx polarization
- RHCP, LHCP, V, H; electronically controlled
- Receiver lock time
- <50 ms
Physical specifications
- Dimensions (H × W × L)
- 42 × 244 × 141 mm / 1.65 × 9.6 × 5.55 inches
- Weight
- 1.4 kg / 3.08 lbs
- User interface
- One status LED; one reset button
- Certifications
- CE, FCC
- Part number
- HSK_DKA8_XXV2_NW
Power
- DC input range
- 10-34 VDC, pin connector
- Power consumption
- Standby: <8 W; Tx & Rx: <40 W (typical)
Interfaces
- 19-pin circular connector
- DC, Ethernet, RS-232 / RS-485, Wake up I/O
- Wireless
- GNSS
Environmental conditions
- Operating temperature
- -20 °C to +55 °C / -4 °F to +131 °F
- Dust and water ingress
- IP67
- Vibration
- SAE J1455
- Salt spray
- SAE J1455
Accessories
- Interface cable
- 19-pin interface cable
- Mounting
- Car magnets mounting kit
Size, weight and power per card.
| Card | Size | Weight | Power |
|---|---|---|---|
| Modem | 155×80 mm | 104 g | 8 W |
| Tx | 52×80 mm | 31 g | 25 W |
| Rx | 70×80 mm | 44 g | 11 W |
Every SmartLITE terminal runs on the same backbone.
Hub, Lab, NMS and Accessories serve both systems - one set of infrastructure, not a duplicate stack per line.